Section 11 – Configuring IP Services
In this lab you will learn how to configure Network Address Translation (NAT) one-to-one on a Cisco router to translate an inside host address to a specific outside IP address.
In this lab you will learn how to configure a Network Address Translation Pool to assign IP’s from a pool of outside IP addresses on a first come first serve basis to inside host(s).
In this lab you will learn how to configure a Cisco router to perform Port Address Translation (PAT) which translates many inside addresses to a single outside public IP address.
In this lab you will learn how to configure the Cisco IOS Dynamic Host Configuration Protocol to dynamically assign IP addresses to host requesting a DHCP Address on the network.
In this lab you will learn how to configure a Cisco IOS DHCP Server IP Exclusion range to prevent the DHCP Server from leasing specific IP Addresses in the specified pool network.
In this lab you will learn how to configure a Cisco switch to use a Dynamic Host Configuration Protocol (DHCP) Helper IP address to assist in client DHCP IP address request for a server.
In this lab you will learn how to configure a Cisco Router or Switch as a Network Time Protocol (NTP) Client to query and automatically set the time and date from a specified server
In this lab you will learn how to configure a Cisco Router or Switch as a Network Time Protocol (NTP) Server to provide time services to NTP client devices on the Local Area Network.
In this lab you will learn how to configure multiple Dynamic Name Systems (DNS) Servers on a Cisco Router and/or Switch to resolve names to IP addresses.