Section 6 – Configuring Static Routing

Lab 6-1Configuring Static Routing
In this lab you will learn how to configure static routing on Cisco router(s) to ensure IP communication between three physically separated IP Networks.


Lab 6-2Configuring a Floating Static Route
In this lab you’ll learn how to configure a floating static route commonly used for redundancy when links fails resulting in routes being removed from the routing table.



Lab 6-3Configuring a Static Default Route
In this lab you’ll learn how to configure a default route used as a “catch all” for traffic destined to a network which is not found in the local routing table.