Free CCNA Workbook
  • Home
  • About
    • Donations
    • Free CCNA Workbook Staff
  • Blog
  • Workbooks
    • CCNA Routing & Switching
    • CCNA Security
    • CCNA Voice
    • CCNA Wireless
  • Stub Lab
    • Stub Lab Information
    • Stub Lab FAQ’s
    • Stub Lab Topology

CCNA Routing & Switching Practice Exam (200-120)

Do you think you’re ready to take the official Cisco CCNA Routing & Switching Exam? Test your skills with the CCNA Routing & Switching practice exam published by Free CCNA Workbook.

Before you Start

The CCNA Routing & Switching practice exam provided by Free CCNA Workbook is designed to test your knowledge relating to Cisco CCNA level technologies. It is not recommended that you use this exam to gauge your readiness for the actual Cisco CCNA R&S Exam.

The majority of the questions found in this practice exam were created from the content found in the Free CCNA Workbook however this practice exam will test you on the full CCNA R&S Exam blueprint and not the just what is found in the workbooks published by Free CCNA Workbook. Questions from the blueprint exam may include but are not limited to; subnetting, OSI Reference Model, Network basics and theory.

Please note that NONE of the questions in this CCNA Routing & Switching practice exam were taken from the actual Cisco CCNA certification exam. Please remember that Cisco Systems Inc. holds discretion over exam results and brain dumping is considered cheating. Brain dumping is the process in which an exam candidate memorized all the REAL questions and answers for the exam before taking the exam to ensure that they pass. If you are flagged as a potential dumper you could risk losing ALL of your Cisco Certifications and be banned from the Cisco Certifications program permanently.

Cisco CCNA Routing & Switching Exam Tips

  • Time management is important, you get 90 minutes to answer approximately 70 questions. With that in mind, on average you can only spend one minute and thirty seconds on each questions.
  • Pay attention to key details on the router simulator portions of the CCNA exam. Failing both router simulations will significantly lower your score.
  • When taking the exam you will receive a dry erase board with a market and eraser. Take the time during the 10 minute survey before the exam starts to write out a subnet chart and other useful general information.
  • You cannot go back to previous questions on the exam once the answer has been submitted. Once you submit your answer you cannot change the answer. Review each question thoroughly before clicking the “Next Question” button.
This CCNA Practice Exam will display one question at a time and will not display the answer(s) and/or explanation(s) when you finish. Once you click next you cannot go back and you cannot use the back button on the browser to skip back to the previous question; doing so will result in loss of progress and you will have to start over again.

CCNA Routing & Switching Practice Exam

Referencing the following router output below; what is the administrative distance for the route statement destined to the 150.1.4.0/24 network?

Router#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 155.1.0.1 to network 0.0.0.0
     155.1.0.0/24 is subnetted, 4 subnets
C       155.1.0.0 is directly connected, Serial0/0
C       155.1.5.0 is directly connected, FastEthernet0/1
C       155.1.58.0 is directly connected, FastEthernet0/0
C       155.1.45.0 is directly connected, Serial0/1
     150.1.0.0/24 is subnetted, 2 subnets
C       150.1.5.0 is directly connected, Loopback0
R       150.1.4.0 [120/6] via 155.1.45.4
R*   0.0.0.0/0 [150/4] via 155.1.0.1
Router#

 

 

 

 

What command can you execute from user mode to display the current IOS version and feature set running on a router that your consoled into?

 

 

 

 

Loading ... Loading …

Question 1 of 2





Loading


About Free CCNA Workbook

In 2008 Free CCNA Workbook originally started as a sharable PDF but quickly evolved into the largest CCNA training lab website on the net!

 

The website was founded in late 2009 with the goal of providing FREE Cisco CCNA labs that can be completed using the GNS3 platform.

Latest Tweets

  • 9 years ago The @fccnawb website is not only available in HTTPS. We've done this of course to make Google happy lol.
  • 10 years ago Interested in following the Founder of the Free CCNA Workbook website? Check out @MattGeorgeCCIE

Useful Links

  • Stub Lab GNS3 Topology File Download
  • GNS3 - Cisco Device Emulator Download
  • Geek Fluent Blog by Dave Henry
  • Junos Workbook | Free Juniper JNCIA Training
  • Putty Terminal Emulator (Free Download)
  • Quiz Me! - CCNA R&S Practice Exam

© Copyright 2009-2017 Free CCNA Workbook All Rights Reserved.

Legal | Privacy Policy | Sitemap | Contact Us

sponsored